We Light Your Way
to a Brighter Day Electrical Services You Can Rely On

Proudly Serving Federal Way and Greater Puget Sound Since 1990

Electrical Panel Installation in Tacoma, WA

Serving Greater Puget Sound Homeowners Since 1990. Licensed. Warranted.

Fuller Electric has been serving Tacoma, WA and the Greater Puget Sound area since 1990. We’re a family-owned, woman-owned, licensed and insured electrical team, and breaker panel installation and replacement are some of the most important work we do. Every panel job gets our full attention from assessment to final test, with a focus on safety, reliability, and work that holds up for decades.

If your home needs a new electrical panel, don’t wait. Call Fuller Electric today at (206) 483-1704 for same-day service and a straightforward estimate.

Why Tacoma Homeowners Trust Fuller Electric

We were voted Best Electrical Service in the PNW by readers of The Seattle Times in 2024 (People’s Choice First Place), and recognized by Expertise.com and ThreeBestRated among the top electricians in the region. Those acknowledgments reflect what our customers tell us directly: we show up on time, explain our work clearly, and leave the job clean.

Our team holds membership in the International Brotherhood of Electrical Workers (IBEW) and the Master Builders Association of King and Snohomish Counties. We’re also a King County Certified Small Contractor and Supplier and a Tesla Energy Certified Installer. Panel installation is backed by a warranty, and we offer an Affordability Program so the cost of a necessary upgrade doesn’t have to come as a shock.

Signs Your Tacoma Home May Need a Panel Replacement

Knowing when to call is half the battle. These are the situations we hear about most often:

Common warning signs that your panel needs attention:

Frequent breaker trips: The panel is likely overloaded or starting to fail
Flickering or dimming lights: Voltage fluctuations often point to an inadequate panel
Burn marks, heat, or a burning smell near the box: Serious fire-hazard indicators that need immediate attention
A panel 25 or more years old: Older panels may not meet current code or handle modern electrical loads
Still running on a fuse box: An outdated system that’s ready for an upgrade to circuit breakers
Shocks when touching switches or appliances: A wiring or panel problem that shouldn’t wait
Planning to add an EV charger, hot tub, or heat pump: High-draw appliances typically require a panel upgrade to support the increased amperage

Electrical Panels 101: What Tacoma Homeowners Should Know

The electrical panel is the central distribution point for your home. It takes power from the utility line and routes it through individual circuits to every outlet, light, and appliance. When that panel is undersized or aging, the whole home feels it.

Most modern homes need panels capable of handling between 100 and 200 amps. Many older homes in Tacoma and across the Greater Puget Sound still have 60-amp or 100-amp panels that weren’t built for today’s electrical demands. The region has a significant share of mid-20th-century housing stock, and those homes are especially likely to benefit from an upgrade. Replacing a fuse box with a modern circuit breaker panel also eliminates risks tied to aging fuse systems, including the use of incorrect replacement fuses, which is a known contributor to fuse-related electrical fires.

Washington State requires an electrical permit for panel replacement work, issued through the Washington State Department of Labor and Industries. Our licensed electricians pull and manage that permit on your behalf. When we size a replacement panel correctly from the start, it can support future additions like EV charger circuits, whole-home surge protection, and solar battery systems without requiring another upgrade down the road.

How Can We Help?

Services Done Right the First Time

Make Your Project Affordable

Wattson Here! I'll Light the Way to Easy Payment Options!

Get the electrical services you need now and spread the cost over time. Our plan helps you manage installations, repairs, and upgrades without stretching your budget and ensures your home or business stays safe and efficient.

Apply Today

Our Breaker Panel Installation Process in Tacoma

We handle electrical panel installation, replacement, repair, and upgrades for Tacoma residential customers. Before we recommend anything, we assess the existing panel’s age, capacity, and condition. That assessment shapes everything that follows.

Once we have a clear picture, we install a modern, high-capacity panel sized to meet your home’s current needs and ready to support what comes next, whether that’s an EV charger, smart appliances, or home automation. Most panel replacements are completed in a single day. After installation, we test every circuit to confirm the system is functioning safely before we consider the job done.

Our electricians are licensed in Washington State and manage all permit paperwork so you don’t have to. Panel work also pairs naturally with other services: whole-house rewiring, whole-house surge protection, circuit breaker service, and outlet and switch upgrades are all available in the same visit when the scope calls for it.

What Affects the Cost of Electrical Panel Replacement in Tacoma

Panel replacement cost depends on several variables: the size and amperage of the new panel, the complexity of the installation, any wiring corrections required, permit fees, and labor. A straight like-for-like panel swap typically costs less than a service upgrade, such as moving from 100 amps to 200 amps, which involves more materials and additional work at the meter and service entrance.

The only reliable way to know your actual project cost is a site-specific estimate from a licensed electrician. We provide detailed cost breakdowns tailored to each job, so you know exactly what you’re paying for before work begins. We also offer a discount for returning customers.

If upfront cost is a concern, our Affordability Program lets you spread the cost of your installation or upgrade over time. A necessary electrical upgrade shouldn’t sit on hold because of budget timing.

Glowing Reviews from Our Customers

See Why Our Customers Think We’re Brilliant!

“Fantastic Job”
“The end result is fantastic - perfect installation of the new smart panel on the wall and flawless kicking on of the batteries when the home power is off. I highly recommend.”

- Michael W.
“Friendly and Professional”
“Fuller Electric arrived at the scheduled time to install a new inverter for my solar system. The technician, James, was friendly and did great work. I highly recommend them!”

- Winter K.
“Positive Energy”
“From the moment I contacted Fuller Electric, I have been treated with positive energy. When my schedule allows, I will have them back to tackle the heftier tasks on my list. It was a very good encounter for my first use of this company!”

- Michael B.
“Great Service”
“All the repair options were well explained and gave me the chance to match the work to my budget. I would definitely use Fuller Electric and Ted's electrical expertise again as needed!”

- Michael S.
“Clean & Efficient”
“Professional, respectful, and efficient—completing the work quickly and leaving the area clean. I also appreciated that he removed his shoes when entering the house. Thank you, Fuller Electric, for the great service!”

- Curtis F.

View All Reviews

Schedule Your Tacoma Panel Installation Today

We serve Tacoma, WA and the Greater Puget Sound area with same-day availability and a team that’s ready to help. Panel installation is backed by a warranty, and our Affordability Program is available if you’d like to spread the cost over time.

Ready to move forward? Call Fuller Electric at (206) 483-1704 to schedule your electrical panel replacement or installation. We can walk you through your options and help get your home’s electrical system where it needs to be.

What a New Electrical Panel Does for Your Home

A modern circuit breaker panel can reduce the risk of electrical fires and shocks compared to an aging or overloaded system. It also increases your home’s amperage capacity, so more devices and high-draw appliances can run simultaneously without tripping breakers.

An updated panel supports code compliance, which matters when you sell your home, update your homeowner’s insurance, or pull permits for future work. Inspectors routinely flag outdated or undersized panels, and addressing it now can help keep it from becoming a negotiating issue later. A properly sized modern panel can also accommodate whole-home surge protection, dedicated EV charger circuits, and solar battery integration without requiring additional structural changes to your electrical system.

The Bright Ideas Blog

Bright Ideas For Your Home

Visit Our Blog

How Can We Make Your Day Brighter?

Contact Our Electrical Experts Today

First Name
Please enter your first name.
Last Name
Please enter your last name.
Phone
Please enter your phone number.

This isn't a valid phone number.
Email
Please enter your email address.

This isn't a valid email address.
Address
Please lookup your address.
Are you a new customer?
Please make a selection.
How can we help you?
Please enter a message.
By submitting, you agree to receive text messages from Fuller Electric at the number provided, including those related to your inquiry, follow-ups, and review requests, via automated technology. Consent is not a condition of purchase. Msg & data rates may apply. Msg frequency may vary. Reply STOP to cancel or HELP for assistance. Acceptable Use Policy